The JINX-PKL and JINX-RBA sites will soon be collapsed into a larger 15 cabinet location within Parklands. Please look out for communication from our INX manager for details on the move, and when/how this is planned. Additional Planning information will be made available as the process unfolds.
Questions relating to addition hosting facilities (ie. additional colocation space) for equipment that may not be applicable to be housed at the JINX itself, should be addressed to the relevant colocation provider.
On-site support numbers for JINX (office hours)
Please use the contact details mentioned below.
(subject: JINX IDC access on YYYY-MM-DD)
Note that this is the contact details for IS Global Service Center (GSC) that operates on a 24×7 basis. For after-hour support, the GSC can still be contacted.
As per ISPA regulations, the cabling in and to the IX environment is the responsibility of the host. Please do not arrange for cabling directly to the IX, rather work through the host, or our INX Manager. If the ISPA member is already an IS client, they can work through their account manager or if they are not a customer, they can contact email@example.com to initiate the cabling process.
If you are trying to find the JINX facility, these are located at:
Vaults 14 and 16
IDC Beta Hosting Room
2nd Floor, IS Junction
158 Jan Smuts Avenue
IDC 1, Vault 4 Second Floor,
9 Keyes Drive Rosebank Johannesburg
Pod 6 - Meet-Me-Room
25 Landmarks Avenue
IP address allocation
The IPv4/IPv6 address blocks for JINX are:
DATA vlan: 196.223.14.X/24 and 2001:43f8:1f0::X/64 VOIP vlan: 196.223.15.X/24 and 2001:43f8:1f0:1::X/64
where X is assigned on application for a port.
Questions about the allocation of addresses for the INXes should be addressed to .